Eliminate Risk of Failure with RedHat EX200 Exam Dumps

Schedule your time wisely to provide yourself sufficient time each day to prepare for the RedHat EX200 exam. Make time each day to study in a quiet place, as you'll need to thoroughly cover the material for the Red Hat Certified System Administrator exam. Our actual Red Hat Certified System Administrator exam dumps help you in your preparation. Prepare for the RedHat EX200 exam with our EX200 dumps every day if you want to succeed on your first try.

GET UNLIMITED ACCESS

All Study Materials

Instant Downloads

24/7 costomer support

Satisfaction Guaranteed

Q1.

Part 2 (on Node2 Server)

Task 8 [Tuning System Performance]

Set your server to use the recommended tuned profile

AExplanation:
[root@node2 ~]# tuned-adm list
[root@node2 ~]# tuned-adm active
Current active profile: virtual-guest
[root@node2 ~]# tuned-adm recommend
virtual-guest
[root@node2 ~]# tuned-adm profile virtual-guest
[root@node2 ~]# tuned-adm active
Current active profile: virtual-guest
[root@node2 ~]# reboot
[root@node2 ~]# tuned-adm active
Current active profile: virtual-guest

Answer: A

Q2.

Part 2 (on Node2 Server)

Task 7 [Implementing Advanced Storage Features]

Create a thin-provisioned filesystem with the name think_fs from a pool think_pool using the devices.

The filesystem should be mounted on /strav and must be persistent across reboot

AExplanation:
*
[root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
vdo1 253:4 0 50G 0 vdo /vbread
[root@node2 ~]# yum install stratis* -y
[root@node2 ~]# systemctl enable --now stratisd.service
[root@node2 ~]# systemctl start stratisd.service
[root@node2 ~]# systemctl status stratisd.service
[root@node2 ~]# stratis pool create think_pool /dev/vdd
[root@node2 ~]# stratis pool list
Name Total Physical Properties
think_pool 5 GiB / 37.63 MiB / 4.96 GiB ~Ca,~Cr
*
[root@node2 ~]# stratis filesystem create think_pool think_fs
[root@node2 ~]# stratis filesystem list
Pool Name Name Used Created Device UUID
think_pool think_fs 546 MiB Mar 23 2021 08:21 /stratis/think_pool/think_fs ade6fdaab06449109540c2f3fdb9417d
[root@node2 ~]# mkdir /strav
[root@node2 ~]# lsblk
[root@node2 ~]# blkid
/dev/mapper/stratis-1-91ab9faf36a540f49923321ba1c5e40d-thin-fs-ade6fdaab06449109540c2f3fdb9417d: UUID='ade6fdaa-b064-4910-9540-c2f3fdb9417d' BLOCK_SIZE='512' TYPE='xfs'
*
[root@node2 ~]# vim /etc/fstab
UUID=ade6fdaa-b064-4910-9540-c2f3fdb9417d /strav xfs defaults,x-systemd.requires=stratisd.service 0 0
[root@node2 ~]# mount /stratis/think_pool/think_fs /strav/
[root@node2 ~]# df -hT
/dev/mapper/stratis-1-91ab9faf36a540f49923321ba1c5e40d-thin-fs-ade6fdaab06449109540c2f3fdb9417d xfs 1.0T 7.2G 1017G 1% /strav

Answer: A

Q3.

Part 2 (on Node2 Server)

Task 6 [Implementing Advanced Storage Features]

Add a new disk to your virtual machine with a ize of 10 GiB

On this disk, create a VDO volume with a size of 50 GiB and mount it persistently on /vbread with xfs filesystem

AExplanation:
*
[root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# yum install kmod-kvdo vdo
[root@node2 ~]# systemctl enable --now vdo
[root@node2 ~]# systemctl start vdo
[root@node2 ~]# systemctl status vdo
[root@node2 ~]# vdo create --name=vdo1 --device=/dev/vde --vdoLogicalSize=50G
[root@node2 ~]# vdostats --hu
Device Size Used Available Use% Space saving%
/dev/mapper/vdo1 10.0G 4.0G 6.0G 40% N/A
[root@node2 ~]# mkfs.xfs -K /dev/mapper/vdo1
*
[root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vde 252:64 0 10G 0 disk
vdo1 253:4 0 50G 0 vdo
[root@node2 ~]# mkdir /vbread
[root@node2 ~]# blkid
/dev/mapper/vdo1: UUID='1ec7a341-6051-4aed-8a2c-4d2d61833227' BLOCK_SIZE='4096' TYPE='xfs'
[root@node2 ~]# vim /etc/fstab
UUID=1ec7a341-6051-4aed-8a2c-4d2d61833227 /vbread xfs defaults,x-systemd.requires=vdo.service 0 0
[root@node2 ~]# mount /dev/mapper/vdo1 /vbread/
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vdo1 xfs 50G 390M 50G 1% /vbread

Answer: A

Q4.

Part 2 (on Node2 Server)

Task 5 [Managing Logical Volumes]

Add an additional swap partition of 656 MiB to your system. The swap partition should automatically mount when your system boots

Do not remove or otherwise alter any existing swap partition on your system

AExplanation:
*
[root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdc 252:32 0 5G 0 disk
vdc1 252:33 0 4.1G 0 part
datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1548 -2
[root@node2 ~]# free -m
total used free shared buff/cache available
Mem: 1816 1078 104 13 633 573
Swap: 2047 1 2046
[root@node2 ~]# parted /dev/vdc print
Number Start End Size Type File system Flags
1 1049kB 4404MB 4403MB primary lvm
*
[root@node2 ~]# parted /dev/vdc mkpart primary linux-swap 4404MiB 5060MiB
[root@node2 ~]# mkswap /dev/vdc2
Setting up swapspace version 1, size = 656 MiB (687861760 bytes)
no label, UUID=9faf818f-f070-4416-82b2-21a41988a9a7
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1804 -2
[root@node2 ~]# swapon /dev/vdc2
*
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1804 -2
/dev/vdc2 partition 671740 0 -3
[root@node2 ~]# blkid
/dev/vdc2: UUID='9faf818f-f070-4416-82b2-21a41988a9a7' TYPE='swap' PARTUUID='0f22a35f-02'
[root@node2 ~]# vim /etc/fstab
UUID=9faf818f-f070-4416-82b2-21a41988a9a7 swap swap defaults 0 0
[root@node2 ~]# reboot
[root@node2 ~]# swapon -s
Filename Type Size Used Priority
/dev/dm-1 partition 2097148 1804 -2
/dev/vdc2 partition 671740 0 -3

Answer: A

Q5.

Part 2 (on Node2 Server)

Task 4 [Managing Logical Volumes]

Resize the logical volume, lvrz and reduce filesystem to 4600 MiB. Make sure the the filesystem contents remain intact with mount point /datarz

(Note: partitions are seldom exactly the size requested, so anything within the range of 4200MiB to 4900MiB is acceptable)

AExplanation:
*
[root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb 252:16 0 5G 0 disk
vdb1 252:17 0 4.2G 0 part
vgrz-lvrz 253:2 0 4.1G 0 lvm /datarz
vdc 252:32 0 5G 0 disk
vdc1 252:33 0 4.4G 0 part
datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvrz vgrz -wi-ao---- 4.10g
[root@node2 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vgrz 1 1 0 wz--n- <4.15g 48.00m
[root@node2 ~]# parted /dev/vdb print
Number Start End Size Type File system Flags
1 1049kB 4456MB 4455MB primary lvm
*
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.0G 17M 3.8G 1% /datarz
[root@node2 ~]# parted /dev/vdb mkpart primary 4456MiB 5100MiB
[root@node2 ~]# parted /dev/vdb set 2 lvm on
[root@node2 ~]# udevadm settle
[root@node2 ~]# pvcreate /dev/vdb2
Physical volume '/dev/vdb2' successfully created.
*
[root@node2 ~]# vgextend vgrz /dev/vdb2
Volume group 'vgrz' successfully extended
[root@node2 ~]# lvextend -r -L 4600M /dev/vgrz/lvrz
Size of logical volume vgrz/lvrz changed from 4.10 GiB (1050 extents) to 4.49 GiB (1150 extents).
Logical volume vgrz/lvrz successfully resized.
[root@node2 ~]# resize2fs /dev/vgrz/lvrz
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.4G 17M 4.2G 1% /datarz

Answer: A

Are You Looking for More Updated and Actual RedHat EX200 Exam Questions?

If you want a more premium set of actual RedHat EX200 Exam Questions then you can get them at the most affordable price. Premium Red Hat Certified System Administrator exam questions are based on the official syllabus of the RedHat EX200 exam. They also have a high probability of coming up in the actual Red Hat Certified System Administrator exam.
You will also get free updates for 90 days with our premium RedHat EX200 exam. If there is a change in the syllabus of RedHat EX200 exam our subject matter experts always update it accordingly.

GET EX200 EXAM PREMIUM ACCESS