Home /
Fortinet /
Fortinet Certified Solution Specialist /
NSE7_EFW-7.2 Dumps

Eliminate Risk of Failure with Fortinet NSE7_EFW-7.2 Exam Dumps

Schedule your time wisely to provide yourself sufficient time each day to prepare for the Fortinet NSE7_EFW-7.2 exam. Make time each day to study in a quiet place, as you'll need to thoroughly cover the material for the Fortinet NSE 7 - Enterprise Firewall 7.2 exam. Our actual Fortinet Certified Solution Specialist exam dumps help you in your preparation. Prepare for the Fortinet NSE7_EFW-7.2 exam with our NSE7_EFW-7.2 dumps every day if you want to succeed on your first try.

GET UNLIMITED ACCESS

All Study Materials

Instant Downloads

24/7 costomer support

Satisfaction Guaranteed

Q1.

Winch two statements about ADVPN are true? (Choose two)

Aauto-discovery receiver must be set to enable on the Spokes.

BSpoke to-spoke traffic never goes through the hub

Clt supports NAI for on-demand tunnels

DRouting is configured by enabling add-advpn-route

Answer: A, C

See the explanation below.

ADVPN (Auto Discovery VPN) is a feature that allows to dynamically establish direct tunnels (called shortcuts) between the spokes of a traditional Hub and Spoke architecture. The auto-discovery receiver must be set to enable on the spokes to allow them to receive NHRP messages from the hub and other spokes. NHRP (Next Hop Resolution Protocol) is used for on-demand tunnels, which are established when there is traffic between spokes. Routing is configured by enabling add-nhrp-route, not add-advpn-route.Reference:=ADVPN | FortiGate / FortiOS 7.2.0 | Fortinet Document Library,Technical Tip: Fortinet Auto Discovery VPN (ADVPN)

Q2.

Which two statements about bfd are true? (Choose two)

AIt can support neighbor only over the next hop in BGP

BYou can disable it at the protocol level

CIt works for OSPF and BGP

DYou must configure n globally only

Answer: B, C

See the explanation below.

BFD (Bidirectional Forwarding Detection) is a protocol that can quickly detect failures in the forwarding path between two adjacent devices. You can disable BFD at the protocol level by using the ''set bfd disable'' command under the OSPF or BGP configuration. BFD works for both OSPF and BGP protocols, as well as static routes and SD-WAN rules.Reference:=BFD | FortiGate / FortiOS 7.2.0 - Fortinet Document Library, section ''BFD''.

Q3.

Exhibit.

q3_NSE7_EFW-7.2

Refer to the exhibit, which shows the output from the webfilter fortiguard cache dump and webfilter categories commands.

Using the output, how can an administrator determine the category of the training.fortinet.com am website?

AThe administrator must convert the first three digits of the IP hex value to binary

BThe administrator can look up the hex value of 34 in the second command output.

CThe administrator must add both the Pima in and Iphex values of 34 to get the category number

DThe administrator must convert the first two digits of the Domain hex value to a decimal value

Answer: B

See the explanation below.

Option B is correct because the administrator can determine the category of the training.fortinet.com website by looking up the hex value of 34 in the second command output.This is because the first command output shows that the domain and the IP of the website are both in category (Hex) 34, which corresponds to Information Technology in the second command output1.

Option A is incorrect because the administrator does not need to convert the first three digits of the IP hex value to binary.The IP hex value is already in the same format as the category hex value, so the administrator can simply compare them without any conversion2.

Option C is incorrect because the administrator does not need to add both the Pima in and Iphex values of 34 to get the category number.The Pima in and Iphex values are not related to the category number, but to the cache TTL and the database version respectively3.

Option D is incorrect because the administrator does not need to convert the first two digits of the Domain hex value to a decimal value.The Domain hex value is already in the same format as the category hex value, so the administrator can simply compare them without any conversion2.Reference: =

1: Technical Tip: Verify the webfilter cache content4

2: Hexadecimal to Decimal Converter5

3: FortiGate - Fortinet Community6

: Web filter | FortiGate / FortiOS 7.2.0 - Fortinet Documentation7

Q4.

Which two statements about the Security fabric are true? (Choose two.)

AFortiGate uses the FortiTelemetry protocol to communicate with FortiAnatyzer.

BOnly the root FortiGate sends logs to FortiAnalyzer

COnly FortiGate devices with configuration-sync receive and synchronize global CMDB objects that the toot FortiGate sends

DOnly the root FortiGate collects network topology information and forwards it to FortiAnalyzer

Answer: A, D

See the explanation below.

FortiGate uses the FortiTelemetry protocol to communicate with FortiAnalyzer and other Security Fabric devices to exchange information such as device status, network topology, and security events1.Only the root FortiGate collects network topology information and forwards it to FortiAnalyzer, where it can be viewed and analyzed2.Reference: =Security Fabric - Fortinet Documentation,Fortinet Security Fabric for Securing Digital Innovations

Q5.

You created a VPN community using VPN Manager on FortiManager. You also added gateways to the VPN community. Now you are trying to create firewall policies to permit traffic over the tunnel however, the VPN interfaces do not appear as available options.

ACreate interface mappings for the IPsec VPN interfaces before you use them in a policy.

BRefresh the device status using the Device Manager so that FortiGate populates the IPSec interfaces

CConfigure the phase 1 settings in the VPN community that you didnt initially configure. FortiGate automatically generates the interfaces after you configure the required settings

Dinstall the VPN community and gateway configuration on the fortiGate devices so that the VPN interfaces appear on the Policy Objects on fortiManager.

Answer: D

See the explanation below.

To use the VPN interfaces in a policy, you need to install the VPN community and gateway configuration on the FortiGate devices first. This will create the VPN interfaces on the FortiGate and sync them with FortiManager.Reference:

Creating IPsec VPN communities

VPN | FortiGate / FortiOS 7.2.0

Are You Looking for More Updated and Actual Fortinet NSE7_EFW-7.2 Exam Questions?

If you want a more premium set of actual Fortinet NSE7_EFW-7.2 Exam Questions then you can get them at the most affordable price. Premium Fortinet Certified Solution Specialist exam questions are based on the official syllabus of the Fortinet NSE7_EFW-7.2 exam. They also have a high probability of coming up in the actual Fortinet NSE 7 - Enterprise Firewall 7.2 exam.
You will also get free updates for 90 days with our premium Fortinet NSE7_EFW-7.2 exam. If there is a change in the syllabus of Fortinet NSE7_EFW-7.2 exam our subject matter experts always update it accordingly.

GET NSE7_EFW-7.2 EXAM PREMIUM ACCESS