Eliminate Risk of Failure with Dell EMC D-PVM-OE-01 Exam Dumps

Okay, I understand. We need to configure a recurring exclusion window in the Unisphere for PowerMax simulator to exclude performance load during a weekly backup that occurs every Sunday from 8:00 AM to 9:00 AM. This exclusion will prevent the backup load from affecting system-level compliance calculations.

Here's a step-by-step guide on how to do this, based on typical Unisphere functionality:

Steps:

1. Launch the Simulator and Navigate to the System Settings

Open Unisphere for PowerMax in your web browser.

Log in to the simulator (you should already be logged in with the array SID 1762 selected, based on the image).

In the left-hand navigation pane, locate the settings or configuration section. The exact location might vary slightly, but it's often found under:

Home > System Settings

Settings (an icon representing settings, like a gear)

Admin > System

In this instance, click the gear icon on the top right corner of the Unisphere interface.

2. Find the Exclusion Window Settings

Within the system settings, look for a section related to performance monitoring, metrics, or thresholds.

Within this section, search for an option to configure 'Exclusion Windows,' 'Scheduled Exclusions,' or something similar. The exact name may vary.

3. Create a New Exclusion Window

Click on a button or link to create a new exclusion window. This might be labeled:

'Create'

'Add'

'+' (a plus icon)

A new window or panel will appear, allowing you to configure the exclusion window settings.

4. Configure the Exclusion Window Settings

Name (Optional): You can give the exclusion window a descriptive name, such as 'Weekly Backup Exclusion.'

Type: Select 'Recurring' or 'Repeating' as the exclusion window type.

Schedule:

Day of the Week: Select 'Sunday'.

Start Time: Set the start time to 08:00 (or 8:00 AM). Make sure the time is in 24-hour format or that you correctly select AM if using 12-hour format.

End Time: Set the end time to 09:00 (or 9:00 AM).

Scope/Target: Since we want this exclusion to apply at the system level, make sure the scope is set to 'System' or the entire array (SID 1762 in this case). You might not need to explicitly select this if system-level is the default.

Components/Metrics: In some Unisphere versions, you can choose which components or metrics to exclude. In our case, we want to exclude the load for 'all components.' If there's an option to select components, either choose 'All' or leave it at the default (which likely includes all components).

5. Save the Exclusion Window

After configuring all the settings, review them carefully to make sure they are correct.

Click the button to save the exclusion window. This might be labeled:

'Create'

'Save'

'OK'

'Apply'

6. Verify Exclusion Window Creation (Optional)

After the exclusion window is created, you can usually verify its settings in the exclusion window list.

You should see the new exclusion window listed with the correct schedule (Sunday, 8:00 AM - 9:00 AM) and scope (system level).

We need to create a secure snapshot named 'Stor1' from the storage group 'StorGroup1' in the Unisphere for PowerMax simulator, and the snapshot should be protected from deletion for two days.

Here's a step-by-step guide on how to do this, based on typical Unisphere functionality:

Steps:

1. Launch the Simulator and Navigate to the Storage Groups Section

Open Unisphere for PowerMax in your web browser.

Log in to the simulator (you should already be logged in with the array SID 1762 selected).

In the left-hand navigation pane, click on Storage and then select Storage Groups.

2. Locate and Select 'StorGroup1'

In the Storage Groups view, you'll see a list of all storage groups on the array.

Find the storage group named 'StorGroup1'.

Click on the name 'StorGroup1' to open its details view.

3. Initiate the Snapshot Creation Process

Within the 'StorGroup1' details view, look for an option related to creating snapshots or protecting the storage group. This might be a button labeled:

'Protect'

'Create Snapshot'

'SnapVX'

Or an icon representing snapshot creation.

Click the appropriate button or icon to start the snapshot creation process.

4. Configure Snapshot Settings

A new window or panel will appear, allowing you to configure the snapshot settings.

Snapshot Name: Enter Stor1 as the snapshot name.

Snapshot Technology: Select SnapVX (or a similar option) as the snapshot technology.

Secure Snapshot: This is crucial. Look for an option labeled 'Secure Snapshot,' 'Enable Secure Snap,' 'Secure Snap,' or something similar. Check this option.

Retention/Expiration: You need to set the retention period for the secure snapshot. This will define how long the snapshot cannot be deleted. There are usually a few ways to configure this:

Expiration Time: Set an explicit expiration date and time that is two days from now.

Retention Period: Specify a retention period of 2 days.

No Expiry: This option is not what we want here. We want the snap to be secure for 2 days.

Choose the appropriate option to make the snapshot undeletable for two days.

Other Settings: Review any other available settings. You might be able to choose between creating a new snapshot or linking to an existing one. Select the option to create a new snapshot.

5. Create the Snapshot

After configuring all the snapshot settings, review them carefully to ensure they are correct.

Click the button to create the snapshot. This button might be labeled:

'Run Now'

'OK'

'Create'

'Finish'

6. Verify Snapshot Creation (Optional)

After the snapshot creation operation completes, you can verify that the snapshot was created successfully:

Go back to the 'StorGroup1' details view.

Look for a tab or section related to snapshots (e.g., 'Snapshots,' 'TimeFinder,' 'Local Replication').

You should see the 'Stor1' snapshot listed there, and its status should indicate that it's a secure snapshot with the correct retention period (2 days).

We need to terminate a clone session for the storage group named 'DATA' in the Unisphere for PowerMax simulator.

Here's a step-by-step guide on how to do this, based on typical Unisphere functionality and the context of the question:

Steps:

1. Launch the Simulator and Navigate to the TimeFinder/Clone Section

Open Unisphere for PowerMax in your web browser.

Log in to the simulator (you should already be logged in with the array SID 1762 selected, based on the provided image).

In the left-hand navigation pane, locate the section related to TimeFinder operations. This is usually found under:

Data Protection

Local Protection

TimeFinder

Expand the relevant sections and click on TimeFinder SnapVX or TimeFinder Clone (the exact wording might vary slightly in the simulator). The goal is to get to the view where you can manage clone sessions.

2. Locate the Clone Session for the 'DATA' Storage Group

The TimeFinder/Clone view will display a list of existing clone sessions.

You need to find the session associated with the 'DATA' storage group. Look for the following:

Storage Group Name: The 'DATA' storage group should be listed as the source of the clone session.

Session Type/Mode: Verify that it's a Clone session (not a SnapVX snapshot or another type of session).

3. Select the Clone Session

Once you've found the correct clone session for the 'DATA' storage group, select it.

You can usually do this by:

Clicking a checkbox next to the session.

Clicking on the session itself (if the interface allows it).

4. Terminate the Clone Session

After selecting the clone session, look for an action button or menu option to terminate it. This might be labeled:

'Terminate'

'Delete'

'Remove'

'Fracture' (in some older versions)

'Stop'

Click the appropriate button to initiate the termination process.

Confirmation: You will likely be prompted with a confirmation message to ensure you want to terminate the selected clone session. Verify that you have selected the correct session (the one for the 'DATA' storage group) and confirm the termination.

We need to remove all resources associated with a deprecated web application server named web_host_1 in the Unisphere for PowerMax simulator.

Here's a step-by-step guide on how to accomplish this, based on typical Unisphere functionality and the context of the question:

Steps:

1. Launch the Simulator and Navigate to the Hosts Section

Open Unisphere for PowerMax in your web browser.

Log in to the simulator.

In the left-hand navigation pane, click on Hosts > Hosts. This will take you to the Hosts management view.

2. Locate the Host web_host_1

In the Hosts view, you'll see a list of all configured hosts.

Find the host named web_host_1. You might need to use the search or filtering options if there are many hosts listed.

3. Identify Associated Resources

Before deleting the host, it's crucial to identify all resources associated with it. These typically include:

Masking Views: These define the LUNs that a host can access.

Storage Groups: These contain the volumes presented to the host.

Port Groups: These define the connectivity paths (ports) used by the host.

How to Find Associated Resources:

Click on the web_host_1 host entry. This should open a details view or properties page for the host.

Look for tabs or sections labeled 'Masking Views,' 'Storage Groups,' or similar.

Note down the names of any masking views and storage groups associated with web_host_1.

4. Remove the Host from Masking Views

Navigate to Hosts > Masking Views.

Locate the masking views that you identified in Step 3 as being associated with web_host_1.

Open each masking view's properties.

Remove the Host: There should be an option to edit the host list within the masking view. Find web_host_1 in the list of hosts and remove it.

Save Changes: Save the changes to the masking view.

Repeat for all masking views associated with web_host_1.

5. Delete or Modify Storage Groups

Navigate to Storage > Storage Groups.

Locate the storage groups that were associated with web_host_1.

Two Options:

If the storage group is ONLY used by web_host_1: You can delete the entire storage group. Select the storage group and click the Delete button (or a similar option).

If the storage group is shared with other hosts: You need to remove the volumes associated with web_host_1 from the storage group.

Open the storage group's properties.

Go to the 'Volumes' tab.

Identify the volumes that were presented to web_host_1.

Select those volumes and choose the option to 'Remove from Storage Group' or a similarly worded option.

Save the changes to the storage group.

6. Delete the Host

Go back to Hosts > Hosts.

Select web_host_1.

Click the Delete button (or a similar option, like a trashcan icon).

Confirm that you want to delete the host.

7. Verify Removal (Optional)

After deleting the host and modifying the storage groups and masking views, you can verify that the resources have been properly cleaned up.

Check the Storage Groups and Masking Views sections again to ensure that web_host_1 is no longer listed and that the storage groups have been either deleted or modified as intended.

Okay, I understand. The task is to verify the completion of Non-Disruptive Migrations (NDM) and then remove the migration environment using the Unisphere for PowerMax simulator.

Here's a step-by-step guide on how to do this, based on typical Unisphere functionality and the context of the question:

Steps:

1. Launch the Simulator and Navigate to the Migration Section

Open Unisphere for PowerMax in your web browser.

Log in to the simulator.

In the left-hand navigation pane, locate the section related to migrations. This is usually under either:

Data Mobility

Migration

Expand the relevant section and click on Migrations (or a similar option like 'Local Migrations' or 'NDM'). This will take you to the view where you can manage Non-Disruptive Migrations.

2. Verify Migration Session Status

The Migrations view will list all current and past migration sessions.

Look for the following status indicators to confirm that the migrations have completed successfully:

Status: The status should typically be 'Completed,' 'Cutover Complete,' or a similar status indicating successful completion.

Progress: If a progress bar or percentage is shown, it should be at 100% or show that all data has been synchronized.

Important: If any sessions are still in a 'Running,' 'Synchronizing,' or other non-completed state, do not proceed with removing the migration environment. Wait for them to complete.

3. Select Completed Migrations for Removal

Once you've verified that all relevant migration sessions are successfully completed, select the sessions that you want to remove.

You can usually select sessions by:

Clicking a checkbox next to each session.

Clicking on the session itself (if the interface allows it).

4. Remove the Migration Environment

After selecting the completed migration sessions, look for an action button or menu option to remove them. This might be labeled:

'Remove'

'Delete'

'Cleanup'

'Remove Session'

Click the appropriate button to initiate the removal process.

Confirmation: You will likely be prompted with a confirmation message to make sure you want to remove the selected migration sessions. Verify that you have selected the correct sessions and confirm the removal.

5. Verify Removal (Optional)

After the removal operation completes, the Migrations view should refresh.

Verify that the migration sessions you removed are no longer listed.